Public holidays must be configured globally before assignment to individual
clients.
Patriot supports monitoring of your clients' public holiday schedule variations. Public holidays can be assigned to clients along with a public holiday schedule. During the single-day or multi-day period of an assigned public holiday, the client's public holiday schedule will take priority over the client's standard schedule (but not any temporary schedules) for all of Patriot's autostatus alarm monitoring options.
First you must insert and then maintain a list of public holidays at the global level.
Maintenance -> General -> Public Holidays
When inserting or editing a public holiday which spans multiple days the From date should be set to the first day of the public holiday and the To date should be set to the last day of the public holiday.
Public holidays can now be assigned individually, or in bulk to the clients who observe them - either with modified scheduled hours or by closing throughout the holiday period.
Public holidays can be assigned to a holiday group, this allows you to assign public holidays to a client or group of clients by group.
You can maintain the list of public holiday groups from Maintenance -> General -> Public Holidays Groupings
We recommend setting up public holiday groups representing 3 types.
Patriot's Advanced Search tool can be used to locate applicable clients and assign public holidays to them in bulk. The public holiday bulk assignment tool has two modes:
Public holidays can be assigned to individual clients on the Schedule Tab in the Holiday Schedule section.
Public holidays can also be assigned to individual clients by holiday group.
The client's default public holiday schedule is shown to the right of the assigned public holidays. By default the holiday schedule type is Always Set. This means the client is not expected to open on public holidays - the most common scenario.
However in some cases a client will intend to open on public holidays, but only for reduced hours or some other variation on the standard schedule. In these cases you can change the public holiday schedule type to Normal. Now the public holiday schedule, just like the standard schedule, can be set with opening hours for each day of the week that the assigned public holidays can fall upon. This allows the schedule to define different hours for public holidays depending on which days of the week the public holidays falls on in any given year.
Note: care should be taken when setting the schedule times for some holidays, as they can fall on different days one year to the next. When changing scheduled times for public holidays its recommended that all days of the week are considered to accommodate future public holidays.
When Disable Open Out Of Hours is used on a public Holiday scheduled time, this will apply where the holiday is the next schedule, up to 7 days ahead.
The public holiday schedule will take priority over the client's standard schedule within the public holiday period. When the holiday schedule has priority all of Patriot's autostatus alarm monitoring options (Unset out of hours, Late to Close etc.) will observe the public holiday schedule.
The public holiday schedule will not take priority over any temporary schedule changes setup for the client within the public holiday period.
The public holiday period can be defined as the time between midnight before the morning the public holiday is due to begin, until midnight after the evening the public holiday is due to end. E.g. a public holiday setup for Christmas day 2018 will begin at 00:00:00 25/12/2018 and end at 23:59:59 25/12/2018
Because the public holiday period always begins and ends at midnight, you must consider carefully the effects of setting up complex public holiday schedules which span across the midnight boundary. The same is also true if setting up a simple public schedule (like Always Set) for a client that has a complex, midnight boundary crossing, standard schedule.
Some examples:
Consider a bar or restaurant client which has holiday scheduled hours between 1700 and 0200. The 0200 closing time is therefore on the day (let's say it's a Tuesday) after the opening time, and therefore may not fall within the public holiday period. In this case Patriot will expect a closing signal from the client on Tuesday, not at the holiday scheduled 0200 hrs, but at the standard scheduled closing time for a Tuesday.
Consider a bar or restaurant client which has standard scheduled hours between 1700 and 0200. The client has a holiday schedule of type Always Set. Now if the client sends an opening at the standard scheduled time (around 1700) on the day before the public holiday is due to start Patriot will expect a closing signal by midnight instead of the standard scheduled closing time of 0200.
Note: when a holiday schedule of type Normal is set but no scheduled hours exist for the day(s) of the week falling within the holiday period, this will result in the next scheduled hours (holiday or standard - which ever applies) found after the holiday period being used.
Instead of directly assigning public holidays and public holiday schedule to a client it is possible to reference a template client.
When a client references a public holiday template both the assigned public holidays and public holiday schedule are referenced.
Ie. it is not possible to use a template client's assigned public holidays without using the template clients public holiday schedule. This means that the public holiday template setting is primarily useful for multi-area partitioned clients where many areas of the same client share the same standard scheduled hours, or groups of clients which share identical public holiday scheduled times.
